You are looking at a 3d printed OO Gauge Model Railway Low Relief warehouse, commercial building fronts or rears.
To be clear if you are not aware of the term 'low relief' this is where a design is not a complete building and known as a shallow relief or flat relief. Designed primarily to be viewed from one angle and unlike our normal scaled models these have limited depth and typically attached to a back drop or a wall.
We have 4 different designs for the fronts, 4 desigs for the rears (to basically be the match for the fronts) and also 3 depths for each design - 10mm 40mm and 70mm so please choose your option from the drop downs. Three of the designs are quite conservative in design and more small commercial, whilst front/rear 2 is a whopper and a more double fronted industrial unit.
A lot of people will only have space for the 10mm versions but the 40's are a definite middle ground adding a little bit more detail to the side like doors or windows and drainpipes for example. 70mm versions are definitely quite commanding and do take up a lot of space but they have been quite popular
Dimensions: all depths vary as this can be selected 10,40 or 70mm.
Front 1 and rear 1: 132mm W x 78mm H
Front 2 and rear 2: 246mm W x 146.5mm H
Front 3 and rear 3: 157mm W x 85.5mm H
Front 4 and rear 4: 143mm W x 100mm H