The design has been designed around a modern precast coping stone sitting on a brick wall. Due to the design, these are probably best for straight platforms but could be used on curved platforms if you think you can make it work. I have created a spacer between coping stones to define the coping stones. The design also has a 2mm recess behind the coping stone to help add platform infill or add a 2mm plastic card to bridge the gap. I would recommend laying this platform edging on a flat surface. The platform edging is 18mm high. Some filing and sanding may be required to get a perfect fit between each item.
The modular design consists of 1 x left and right platform end slopes (Angle 8 Degrees) and 1 x Centre Section.
The beauty of it being modular is you can select the length of the centre section and even have 2 or 3 sections if you wish using the drop down above.
Dimensions:
Left and Right End Slopes (each): 111mm L x 19mm D x 18mm H
Centre Sections (choose how many you want above): 125mm L x 19mm D x 18mm H